Barter is the present and the future of international trade, especially for people who is starting in the import export business. Barter and more: Triangular operations.
Sprocket shaft set will inevitably be damaged in use, minor damage can be maintained, when the damage is serious, it needs to be replaced, then the problem comes, how to replace the new sprocket shaft set?
Using the lifting ring on the top beam of the hydraulic support as the lifting point, two suitable manual hoist are used to bind the two ends of the new sprocket shaft set and suspend it to the lifting ring.
By adjusting the length of the manual hoist lifting chain, the new sprocket shaft set is hoisted into the clamping chute of the fixed sprocket shaft set. The new sprocket shaft set is installed in place with the help of the hydraulic single prop and the bit rod. Then the two pressure blocks of the fixed sprocket shaft set are installed and the manual hoist of the lifting chain shaft set is removed.
Install the chain winder and guard plate of the sprocket shaft set and the baffle plate of the end cover side of the sprocket shaft set.
Connect the scraper chain, supply reverse liquid to the hydraulic chain stopper, remove the chain stopper, and clean up the sundries on the construction site.
Check the oil level and oil quality of the new sprocket shaft set, inform the control panel electrician to send power to scraper conveyor and test machine. The normal work can be carried out after the trial operation is correct. If you need a sprocket set, please contact us
